Cooling- and heating installation for engine testing bench.

 The  cooling- and heating installation is connected to the engine in place of the radiator. The cooling fluid is preheated so testing can be started faster then when working with a radiator. During the testing the installation holds the engine to the preset temperature (within 1 degree).

While replacing parts the cooling fluid remains to the set temperature and additional pump takes care of the circulation of the water

An engine set-up can be tested under several different operating temperatures. Hoses are connected by means of a quick - release connector.After the connection of the hoses the engine will fill automatically with cooling fluid.

No temperature changes.
The complete installation can be mounted to the wallor ceiling
The quick – release connector must be mounted close to the engine

Advantages: