MORE INFORMATION
6. MAKING YOUR NETWORK COMPATIBLE WITH MS-DOS 5.0
6.1 MS-DOS Shell and Networks
Most network software won't work correctly if you start it from a
MS-DOS Shell command prompt. Start your network before starting MS-DOS
Shell.
6.2 3+Share
If you installed 3Com 3+Share with minimal NetBIOS implementation, do
one of the following:
• Reinstall with a complete NetBIOS implementation.
• Use the REDIR.400 file to replace the MSREDIR.EXE file on your hard
disk.
• Call Microsoft Sales Information Center (MSIC) and request the LAN
Manager 2.0 supplemental disk; see your registration card for the phone
number.
6.3 AT&T StarGROUP
If your AT&T StarGROUP version does not support MS-DOS 5.0, contact
your AT&T representative or the AT&T National Systems Support Hotline
for information about required modifications or upgrades.
6.4 Microsoft LAN Manager 2.0 Enhanced
If you are running Microsoft LAN Manager 2.0 Enhanced or an OEM
version of LAN Manager 2.0 Enhanced, you may want to take advantage of
any remaining space in the upper memory area to load LAN Manager
services such as NETPOPUP in this area. Call Microsoft Customer
Service to request the LAN Manager 2.0 supplemental disk and technical
notes. See your registration card for the phone number.
**************************************************
* *
* the Lan Manager 2.0 supplemental disk can be obtained *
* by calling: 800-426-9400 *
* *
**************************************************
If you are running Microsoft LAN Manager 2.0 Enhanced and get a
"NET3055" message, do one of the following:
• Use the EMM386 /ram switch and the LIM=YES command in the
[workstation] section of your LANMAN.INI file.
- or -
• If you use the EMM386 /noems switch, use the LIM=NO command in the
[workstation] section of your LANMAN.INI file.
6.5 Net/One PC
If Ungermann-Bass Net/One PC does not load with MS-DOS 5.0, do one of
the following:
• Contact your vendor to get an updated LOADNIU.EXE file.
• Put a UBPAUSE command between the LOADNIU and XNSBIOS lines of the
MSNET.INI file.
• Issue network commands from a batch file that includes a PAUSE
command between the LOADNIU and XNSBIOS lines.
6.6 Novell Networks
NetWare Shell Version:
The NetWare workstation shell software is Novell's basic DOS shell
and is included with MS-DOS 5.0. You may require a different shell
for a specific application. Contact your authorized Novell reseller
if you believe another shell may be needed. EMSNET5.EXE and
XMSNET5.EXE, alternate shells, are available from Novell.
Novell Remote Workstations (RPLFIX.COM):
If you can't load MS-DOS 5.0 on your remote-boot workstation,
contact Novell for an upgrade of your remote-boot software.
Drive Mapping Utilities:
If you run LOGIN.EXE, MAP.EXE, and SESSION.EXE from MS-DOS Shell or
while MS-DOS Shell is running, a search path is not added to the
existing path. Use these programs before starting MS-DOS Shell.
COMSPEC Variable:
If you use the Novell login program to set the COMSPEC variable
after starting MS-DOS 5.0, and you can't reload the COMMAND.COM
file, remove the c:\dos\ entry from the SHELL= command in your
CONFIG.SYS file or contact your Novell vendor to get a new login
program.
TBMI2.COM and Task Swapper:
If you can't use Task Swapper in MS-DOS Shell when running a Novell
network, do the following:
• Expand and copy the IPX.OB_ and TBMI2.CO_ files from Disk 6 for
5.25" disks or from Disk 3 for 3.5" disks.
• Rename the files IPX.OBJ and TBMI2.COM.
• Use the IPX.OBJ file to create a new IPX.COM file. For
information about creating an IPX.COM file, see your Novell
documentation.
• Start your network, using the new IPX.COM and NET5.COM files.
• Start TBMI2.COM.
• Start the application that may be causing problems with Task
Swapper. Run the application and then exit.
• Display diagnostic information by typing the following:
• If the value in the field named Far Call Usage is not 0, you
need to run TBMI2.COM before using Task Swapper.
To get help with TBMI2.COM, type the following:
The default configuration for TBMI2.COM is correct for most
applications. If you need help configuring the program, contact
Novell.
TBMI2.COM and Windows:
Don't run TBMI2.COM if you are using Windows 3.0.
6.7 PC-NFS 3.0
If you use PC-NFS 3.0 with MS-DOS Shell, MS-DOS Shell may display more
drives than you have currently enabled. To prevent this, use the
PC-NFS /d switch to specify the number of drives you are using. For
more information, see your PC-NFS documentation.
If you can't use the COPY or XCOPY command on PC-NFS 3.01, contact
your vendor to get an updated version of the PCNFS.SYS device driver.
6.8 TOPS Network
If your system is a TOPS workstation, the MS-DOS Shell MOVE command
may not work.
Don't use the LOADHIGH command with a TOPS network.