Bus Mouse Port on Leading Edge 386 SX (64178)
The information in this article applies to:
• Microsoft Mouse driver for MS-DOS 6.x
• Microsoft Mouse driver for MS-DOS 7.x
• Microsoft Mouse driver for MS-DOS 8.x
• Microsoft Mouse driver for MS-DOS 9.0
• Microsoft InPort Mouse 1.0
• Microsoft InPort Mouse 2.0
This article was previously published under Q64178
SUMMARY
The Leading Edge 386 SX computer has what appears to be a PS/2-style
mouse port near the keyboard connector. This is actually an InPort
mouse connector designed for a Microsoft-compatible bus mouse,
according to Page 6-13 of the "Leading Edge 386 SX User's Guide." The
connection is a standard hosedin connector for an InPort mouse.
There is one switch that may or may not be in the correct position to
install the mouse. This is Switch 3 on the motherboard. This must be
in the ON position or the mouse will not install.
This information applies to the Microsoft Bus/InPort Mouse for MS-DOS
and OS/2 systems.
The Leading Edge product included here is manufactured by a vendor
independent of Microsoft; we make no warranty, implied or otherwise,
regarding this product's performance or reliability.
| Modification Type: |
Major |
Last Reviewed: |
10/3/2003 |
| Keywords: |
KB64178 |
|