Turtle Beach Sound Card: No Sound After Running MemMaker (106424)



The information in this article applies to:
    Microsoft MS-DOS operating system 6.0
    Microsoft MS-DOS operating system 6.2
    Microsoft MS-DOS operating system 6.21
    Microsoft MS-DOS operating system 6.22

This article was previously published under Q106424

SYMPTOMS

Your Turtle Beach sound card may not function correctly after you run MemMaker.

CAUSE

MemMaker does not detect the memory range used by the Turtle Beach sound card ROM.

RESOLUTION

To work around this problem:
    Edit your CONFIG.SYS file and add X= parameters to exclude the memory ranges used by your sound card. For example:

    device=c:\dos\emm386.exe noems highscan x=d000-d1ff x=d600-d7ff

    NOTE: To determine what the memory address your card uses, consult your hardware documentation or contact Turtle Beach.
    Run MemMaker, choosing Custom Setup.
    Choose Yes in response to the prompt "Keep current EMM386 memory exclusions and inclusions?"

Modification Type: Major Last Reviewed: 11/26/1999
Keywords: KB106424